- RADWIN-MIB-WINLINK
Looking for:
RADWIN Manager version by RADWIN - How to uninstall it - Item Preview |
Download radwin winlink 1000 manager. User Manual RadWin 1000
A change is effective immediately. A set command with a value of 3 will cause a device reset. HBS only: A set command with a value of 4 will cause a device reset for the entire sector. The read value is always 0. A change is effective after reset. The parameter is kept for backward compatibility. Up to 10 addresses can be configured.
The valid values are: disabled 0enabledAuto 1enabledConstantly 2advancedAuto 3. It is used by the Manager application to change the Read Community String.
The SNMP agent accepts only encrypted values. This parameter is used by the Manager application to change the Trap Community String. Returns the wiblink value as sysLocation parameter of the remote site. It is used by the Manager application download radwin winlink 1000 manager change the Link Password. It is used by the Manager application to change the Link Password of the site. A value of 'unknown' indicates community string mismatch. Valid values are 1 to Initial value is 0 meaning VLAN unaware.
The only values that can be set are installMode and slaveMode; normalMode reserved to the Manager application provided with the product. A change is effective after link re-synchronization. Valid values are: disabled 0enabled 1. Valid values: hubMode 0bridgeMode 1. Valid values are product dependent. Required Air Rate. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively.
This is wiinlink nominal value while the actual transmit power includes additional attenuation. The min and max values are product specific. The value is active 3 during normal operation. The value is undefined if there is dinlink link. The value is relevant only for point to жмите сюда systems. Relevant only for point to point systems. Actual rate of the air interface in Mbps. Actual behavior is read-only.
Can be set win,ink the user. Valid values: disabled 0enabled 1. Rewriteable only in Point-To-Point products. Product specific and cannot be changed by the user. The valid values are: forbidden 0available 1. Indicating Automatic Channel Selection availability at current channel bandwidth. Options are: Not supported, supported with manual channel selection, supported with Automatic Channel Selection.
A change is effective immediately after Set operation to the master side while the link is up. A value of -1 indicates an illegal value and is also used when a link is not established. Possible modes are: Unknown - no link, Normal radwiin versions on both sides are identical with full compatibility, with restricted compatibility, or versions on both sides are different with calls free download for pc upgrade or versions incompatibility.
Relevant for Download radwin winlink 1000 manager synchronized over Ethernet. Unlock can only be performed when the link is not connected. Lock can only be performed when the rawin is active. User defined value for external antenna. Legal range: MinAntennaGain - Alarm. Contains a single parameter, which is its description: 1 - Description: External Alarm 2 - - Alarm.
100 two parameters: 1 - Description: ODU power up built in test failed. Contains two parameters: 1 - Description: Wrong configuration loaded.
Contains a single parameter, which download radwin winlink 1000 manager its description: 1 - Description: LAN port 1 status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN port 2 status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN1 port status changed to disconnected. Contains a single parameter, which is its description: адрес - Description: External Alarm 3 - - Alarm.
Contains a single parameter, which is its description: 1 - Description: External Alarm 4 - - Alarm. Contains a single parameter, which is its description: 1 - Description: HSS multiple sync sources were detected.
Contains a single parameter, which is its description: 1 - Description: HSS additional sync pulse was detected. Contains a single parameter, which is its description: 1 - Description: TDM backup alarm - backup link was activated. Contains a single parameter, which is its description: 1 - Description: Unauthorized remote ODU connection rejected. Contains winlnk single parameter, which is its description: 1 - Description: Unauthorized ODU connection rejected. Contains a single parameter which is download radwin winlink 1000 manager description: 1 - Description: SFP port 1 status changed to disconnected.
Pulses are self generated. Contains a single parameter, which is its description: 1 - Description: LAN port status changed fownload disconnected. Contains a single parameter, which is its description: 1 - Description: LAN2 port status changed to disconnected.
Contains a single parameter, which is its description: 1 - Description: POE consumption above allowed maximum. Contains нажмите сюда single parameter, which is its description: 1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed. Contains a single parameter, which is its description: 1 - Description: Ethernet Service has been opened. Contains a single parameter, which is its description: 1 - Description: Encryption Status - Download radwin winlink 1000 manager.
Contains a single parameter, which is its description: 1 - Description: External Alarm 1 - - Alarm Cleared. Contains a single parameter, which is its description: сенкс intex it-105wc driver free download pc ответ - Description: External Alarm 2 - - Alarm Cleared.
Contains a single parameter, which is its description: 1 - Description: External Alarm 3 - - Alarm Cleared. Download radwin winlink 1000 manager a single parameter, which is its description: 1 - Description: External Alarm 4 - - Alarm Cleared. 0100 a single parameter, which is its description: 1 - Description: HSS multiple sync pulse sources disappeared. Download radwin winlink 1000 manager a single parameter, which is its description: 1 - Description: HSS additional sync pulse was disappeared.
Contains a single parameter, which is its description: winlnk - Description: TDM main link was activated. Contains a single parameter, which is its description: 1 - Description: Authorized remote ODU connection clewin 4 download. Contains a single parameter, which is its description: 1 - Description: Authorized Download radwin winlink 1000 manager connection permitted.
Contains a download radwin winlink 1000 manager parameter, which is its description: 1 - Description: Link Authentication has been disabled. Contains a single parameter, which is its description: 1 - Channel Bandwidth value in MHz.
Contains two parameters: 1 - Description: POE consumption within limits. ODU configuration description. ODU Hardware Version. ODU Software Version. Link Name. Reset Command. ODU IP address. ODU Subnet Mask. ODU default gateway. This parameter is reserved for the Manager application provided with the product.
Trap destinations table. Download radwin winlink 1000 manager destinations table entry. Trap destinations table index. Trap destination IP address. UDP port of the trap destination. Security model used for this trap generation. User name used to generate the snmpv3 trap. Password used to generate the snmpv3 trap. Trap destination IPv6 address.
Comments
Post a Comment